Filter

case stabiliser for the Lee trimmer cutter and lock stud

Case stabiliser for the Lee trimmer cutter and lock stud

Rated 4.7 out of 5 based on 10 customer ratings

(10 customer reviews)

$7.90 USD

$ USD

$ NZD
$ USD
$ AUD
£ GBP
$ CAD
€ EUR
R ZAR

Our stabiliser helps the Lee Lock Stud and Case Trimmer by stopping cases from being thrown off centre. Speed up your case trimming with a better result.

Caliber

Diameter of your Lee Case trim holder

Clear

Description

We have designed and produced a case stabiliser to stabilise the cases when using the Lee trimmer cutter and lock stud. The case stabiliser for the Lee trimmer cutter and lock stud stops the case from being thrown outwards by the centrifugal force. This will help you to speed up your case trimming and achieve a better quality result.

Two ways it will help you with your case prep:

The case stabiliser for the Lee trimmer cutter and lock stud speeds up your case trim process by stopping the cases from being thrown off centre by the centrifugal forces produced when using the Lock stud case holder.
Reduces the stress on the case mouth when destabilisation occurs. The result of this means that it reduces the inconsistency of concentricity or neck tension, which can occur from the centrifugal forces when the case is thrown out.

Feedback from Mark at Desertguns Gunsmiths:
“I have given your Lee case trim stabiliser a good workout, and what a wonderful piece of kit! It adds an extra step to the process, but the time and frustration it saves is huge!! Also the alignment is perfect every time. Thanks again for it !!”

Trade Me customer feedback about our case stabiliser:

“Anyone looking, these are the best thing to happen to the Lee trimmer ever – so much easier than without! No connection to the seller just wanted to say how impressed I am with them.”

You can order our case stabiliser in the following case size ranges. See below for the size number which will work with the your cases:

222
223, 300BLK
303 Brit
22-250, 270win, 25-06, 30-06
243, 6.5 Creedmoor, 7mm-08, 308,
7mm Rem Mag, 300 Win Mag
270WSM, 300WSM

Special orders can also been made for the following calibers. When ordering choose the special order option and you can submit the caliber type needed in the checkout delivery special instruction area or we can get in contact with you if needed.

6.5mm and .300 PRC,
6.5x55SE,
45-70 Gov.,
7.62×39
7.62x54R,
30-30,
.300 RUM

– Our stabilisers can be ordered in either Lee lock stud case holder diameters: 20.25 mm (.808 in) & 19.25mm (.757 in) see images.

– Send us a question if you have a different case/caliber size you need a stabiliser designed and made for.

Inquire about our case trim stabiliser wall holder.

See Youtube for our case stabiliser in action and some of our other products

Videos

Stabiliser in action using a drill
Case Trim stabiliser gets a coffee grinder upgrade

Additional information

Weight	.007 g
Caliber	Size 2 – 222, 223, 300BLK, Size 3 -.303 Brit, Size 4 – 22-250, 25-06, 270Win, 30-06, Size 5 – 243, 6.5 Creedmoor, 7mm-08, 308, Size 6 – 7mm Rem Mag, 300 Win Mag, Size 7 – 270WSM, 300WSM, Special custom order
Diameter of your Lee Case trim holder	20.25 mm (.808 in), 19.25mm (.757 in)

Brand

ACCU Long Range

ACCU Long Range has created solutions to help you gain accuracy with their cheek risers, bipods and rifle accessories. Tested throughout New Zealand. Through our long range hunting and shooting, we have pushed the boundaries of our knowledge and equipment. We has required us to create solutions, to keep consistent accuracy at Long Range in places where keeping yourself safe is a full time job. We have formed ACCU Long Range to help bring these solutions to you. Let's just say, we are constantly out there putting our products through the hard yards, and finding out how to make them work better. We can experience are a quick honesty check on how well our products will perform in the real situations. This is from our love for the mountains of New Zealand and the harsh weather you need to prepare for,

Reviews (10)

10 reviews for Case stabiliser for the Lee trimmer cutter and lock stud

4.7

Based on 10 reviews

5 star	80	80%
4 star	10	10%
3 star	10	10%
2 star		0%
1 star		0%

Rated 5 out of 5

Bella Y. – 7th February 2018

good purchase

(0) (0)
Rated 5 out of 5

Memphis G. – 23rd February 2018

Excellent company..Thanks ****

(0) (0)
Rated 5 out of 5

Alex R. – 9th May 2018

Excellent company who communicates well and ships fast , highly recommended to all , thank you :0)

(0) (0)
Rated 4 out of 5

Aubrey O. – 20th November 2018

Good company cheers

(0) (0)
Rated 5 out of 5

Aaron S. – 5th January 2019

Awesome company and fantastic product. Thank you so much. Recommend to all.

(0) (0)
Rated 5 out of 5

Nathan B. – 9th June 2020

Great purchase. Thanks

(0) (0)
Rated 5 out of 5

Abdiel B. – 28th August 2020

Great product, and posted quickly !

(0) (0)
Rated 5 out of 5

Riley C. – 15th February 2021

great purchase thanks

(0) (0)
Rated 5 out of 5

Amari A. – 19th February 2021

very good company,fast comunication,highly recommended.

(0) (0)
Rated 3 out of 5

Christine Gregory (verified owner) – 16th December 2025

Havn’t used it yet.

(0) (0)