We have designed and produced a case stabiliser to stabilise the cases when using the Lee trimmer cutter and lock stud. The case stabiliser for the Lee trimmer cutter and lock studย stops the case from being thrown outwards by the centrifugal force. This will help you to speed up your case trimming and achieve a better quality result.
Two ways it will help you with your case prep:
- The case stabiliser for the Lee trimmer cutter and lock stud speeds up your case trim process by stopping the cases from being thrown off centre by the centrifugal forces produced when using the Lock stud case holder.
- Reduces the stress on the case mouth when destabilisation occurs. The result of this means that it reduces the inconsistency of concentricity or neck tension, which can occur from the centrifugal forces when the case is thrown out.
Feedback from Mark at Desertguns Gunsmiths:
“I have given your Lee case trim stabiliser a good workout, and what a wonderful piece of kit! It adds an extra step to the process, but the time and frustration it saves is huge!! Also the alignment is perfect every time. Thanks again for it !!”
Trade Me customer feedback about our case stabiliser:
“Anyone looking, these are the best thing to happen to the Lee trimmer ever – so much easier than without! No connection to the seller just wanted to say how impressed I am with them.”
You can order our case stabiliser in the following case size ranges. See below for the size number which will work with the your cases:
- 222
- 223, 300BLK
- 303 Brit
- 22-250, 270win, 25-06, 30-06
- 243, 6.5 Creedmoor, 7mm-08, 308,
- 7mm Rem Mag, 300 Win Mag
- 270WSM, 300WSM
Special orders can also been made for the following calibers. When ordering choose the special order option and you can submit the caliber type needed in the checkout delivery special instruction area or we can get in contact with you if needed.
- 6.5mm and .300 PRC,
- 6.5x55SE,
- 45-70 Gov.,
- 7.62×39
- 7.62x54R,
- 30-30,
- .300 RUM
– Our stabilisers can be ordered in either Lee lock stud case holder diameters: 20.25 mm (.808 in) & 19.25mm (.757 in) see images.
– Send us a question if you have a different case/caliber size you need a stabiliser designed and made for.
Inquire about our case trim stabiliser wall holder.
See Youtube for our case stabiliser in action and some of our other products
Bella Y. –
good purchase
Memphis G. –
Excellent company..Thanks ****
Alex R. –
Excellent company who communicates well and ships fast , highly recommended to all , thank you :0)
Aubrey O. –
Good company cheers
Aaron S. –
Awesome company and fantastic product. Thank you so much. Recommend to all.
Nathan B. –
Great purchase. Thanks
Abdiel B. –
Great product, and posted quickly !
Riley C. –
great purchase thanks
Amari A. –
very good company,fast comunication,highly recommended.