Harris Bipod Spikes – ERFS Spike & Foot Covers

Increase your Harris bipod stability by adding our ERFS Spike & Foot Covers. They will help to create better grip and cohesion when taking that important shot on different surface types. We have designed these bipod spikes and foot covers to fit the Harris bipods, Harris style bipods and our ALR-TACv2 Lite, ALR-TACv3 bipod series.

Our Harris Bipod Spikes:

Our spike design includes a sharp tip to deliver a singularly aggressive grip, and made from 304 stainless steel. They also have a wider ring to allow you to easily handle this part of the bipod to minimise hurting yourself on the sharpness of the bipod spike’s tip. Our bipod spikes are also light weight, so that you are not adding extra weight to your rifle system. They also include a chamfered pin hole which matches the pin hole on the bipod leg. This help the spike to be held by the pin to eliminate wobble.

Our ERFS Foot Covers:

The rubber foot spike cover is designed to be also used as a bipod foot while shooting. It will give you enhanced grip and stability over the standard bipod feet. It will also help protect your spikes from being blunted and protect you and your gear from accidentally getting cut or torn by the spikes. These covers include a rubber collar which is attached to the bipod leg, reducing the chance of accidentally loosing them.

The ERFS Foot Spike system allows you to shoot off more surfaces, which you may not want to scratch with the foot spikes and allow you to setup quickly if needed. When changing between the foot cover and spike, a significant amount of testing has gone into designing a one hand efficient opening operation, 

Installation:

With our installation kit, our bipod spikes are easily installed. We have designed and included a specialised jig to help you with the installation process. The process of changing Harris bipod feet can be a battle, as they require removal of the pins and insert new pins which are shorter. Our new installation jig and tapered pins have taken a lot of frustration out of the process of changing over the original bipod feet and installing our spikes. 

Features:

• Fits our ALR-TACv2 Lite series bipods.
• Fits our ALR-TACv3 series including the Lever lock and Carbon lock bipods.
• Will fit Harris bipods.
• We have designed and included an installation jig to help with the install process.
• To help achieve a precise fit, two new 12mmx3.2mm roll pins are included.
• Also supplied to help with the installation is an M3 socket screw, as it makes an ideal improvised roll punch (if you don’t have a roll punch).

Some Harris style bipods may need a small piece of shimming (tape) to fit snugly into the bipod as they may have been design with a thinner diameter and the base of the leg

Kit includes:

• 2 x Harris style, ALR-TACv2 Lite, ALR-TACv3 bipod spikes
• 2 x 12mm roll pins
• 1 x spike installation jig (black)
• M3 socket screw
• Instruction guide

Tools required:

• Hammer
• Needle nose pliers (if required)
• Tape (if required)

We have a listings with the bipod spikes and our new ERFS rubber foot covers sold separately. See our other products for great combination kit deals with our ALR-TACv2 Lite and ALR-TACv3 bipod series. We also have Altas style Spikes, Foot covers or our ERFS Atlas style foot spike kit

We have designed these bipod spikes and foot covers to fit Harris bipods, Harris style bipods and our ALR-TACv2 Lite, ALR-TACv3 bipod series.